WALL-MAN® & LIFTMAN ACCESSORIES

Accessories & options

Explore standard accessories and options for Wall-Man and Liftman.

01 / WALL-MAN

Controls & movement

AM000196

Foot pedal incl. valve inst. U/D & R/L

This item allows the operator to drive the Wall-Man Up/Down or Right/Left using his feet (the operator still has the joystick available as well). Note, one foot pedal can only control ONE direction per foot pedal. If the user wants to drive both U/D and R/L, he will require two foot pedals of this item. Per cage.

AM002303

Foot pedal incl. valve inst. In/out

The same as AM000196, but only controls/operate the In/Out movement. Per cage.

02 / WALL-MAN

Dust extraction

AM001402

Dust Extraction Kit Wall-Man kit per WM

Preinstalled dust extraction kit for Wall-Man, for easy connection of sanding tools etc. Pipes and hoses are preinstalled on the Wall-Man, for transport pollutants from the cage of the Wall-Man. The extraction (extraction equipment/solution) itself must be integrated by the buyer. Interface at the top of the Wall-Man. AM001402 is mandatory for this item number. Per cage.

03 / WALL-MAN

Rail options

AM000609

Rail pivot – manual (ONLY for spray booths with dividing doors)

Hinged rail pivot used when roller doors are installed in the booth. This type is manually activated via a rope. Per side.

AM001020

Rail pivot – pneumatic activation, incl cylinders (ONLY for spray booths with dividing doors)

Hinged rail pivot used when roller doors are installed in the booth. This type is pneumatically activated via a manual switch or roller valve. Use AM000821 for a manual switch OR AM000820 for an automatic roller valve – one of them needs to be chosen. Per side.

AM001392

Endstoppers w/shock absorbers on rail – Wall-man

Hydraulic bumper set for use on the rail to avoid rough stops when the Wall-Man hit the end of the rail. To be placed at each end of the rail. Can be used both on left and right side. Per end.

AM001393

Collision-protection w/shock absorbers – between the lifts

Hydraulic bumper set for use when two Wall-Man are running on the same rail. Used to avoid rough stops when both Wall-Man hit each other. Hydraulic bumper placed on one Wall-man and “hit”-bracket placed on the other one. Can be used both on left and right side of Wall-Man. Per each two Wall-Man on the same rail.

04 / WALL-MAN

Safety stops

AM000624

Stop moving down

A rubber isolated bar with valves mounted in the lower front of the cage, which cuts off the air supply to the Wall-Man when making contact with the object when moving down. Per cage.

AM000285

Stop telescoping out

A rubber isolated bar with valves mounted in the lower front of the cage, which cuts off the air supply to the Wall-Man when making contact with the object when moving out. Per cage.

AM002112

Combined stop out down

A rubber isolated bar with valves mounted in the lower front of the cage, which cuts off the air supply to the Wall-Man when making contact with the object when moving down and out. Per cage.

05 / WALL-MAN

Tools & cage options

AM000401

Shelf 600×625 with aluminium plate floor (outside cage)

Shelf for carrying tools and loads. Size: 600x625mm. Max load: 30kg. NOTE, total load of Wall-Man must not exceed 150kg. Can be installed on either left or right side.

AM000072L

Tool tray for back wall in cage (inside cage)

Shelf for carrying tools etc. Size: 600x150x150mm. Max load: 15 kg. NOTE, total load of Wall-Man must not exceed 150kg. To be installed on the rear cage wall.

AM002874

WALL-MAN Trailer Std. Height

For carrying of extra load and equipment. To be connected to the Wall-Man as a separate unit. This unit will follow the Wall-Man left and right (not up/down & in/out). Can be connected on both left and right hand side. Size: 500×500 mm. Max weight allowed is 50kg.

AM010950

Extra door in front of cage

Extra door in front of the cage. Doors are as standard located on the side of the cage. Will not replace any of the standard doors.

AM010596

Cage width +100mm

Using this item will add +100mm of extra width for the cage. Max width of the cage is 1,2 meters.

AM010743

Cage width +300mm

Using this item will add +300mm of extra width for the cage. Max width of the cage is 1,2 meters.

06 / LIFTMAN

Liftman accessories

AM002997

Liftman complete with twin wheels

Puncture free drivewheel LM kit for retrofit

AM011651

Puncture-free wheel LM rubberwheel only

LET’S FIND THE RIGHT SETUP

Configure your Wall-Man or Liftman

Tell us about your installation and the accessories you need. Contact Reglo to discuss the available options.